Synergy Lighting Controls

DEQ LCDS: Distributed Load Controller, Dual Switch Output

Microprocessor-based remote mount distributed controller integrates into Synergy system to provide intuitive control of bi-level lighting. Compatible with all Synergy occupancy sensors for easy code compliance in a variety of applications.

Use LPCS Series power packs to switch up to two full 20A circuits on each zone, eliminating the need for home run wiring back to panel mounted relays.

Installs in the plenum above the area to be controlled in place of the cover on a standard 4” or 5” square junction box.

DEQ LCDS load controller acts as a hub for the connection of the low voltage DEQ APS photocell, occupancy sensor, LPCS power control station and 0-10V dimmable ballast control leads. If desired, a standard wall switch can be used for local on/off operation making the control system totally unobtrusive to the user.

When connected to part of a Synergy® system, the DEQ LCDS can share status, set point and override functions with all Synergy® system controllers, PC graphics and other building control systems through the BACnet™ protocol.

Classification: Class 2 low voltage device.

Ideal for applications which require manual and automatic control of RT5 or similar fluorescent fixtures equipped with step-dimming ballasts, fluorescent fixtures wired for inboard/outboard switching or two independent lighting zones.

Wall-mounted control station provides local manual control with fully integrated occupancy sensor and photocell inputs for automated energy management. May be used as a stand-alone distributed room controller or connected to a Synergy® system for timeclock control and integration with a building automation system.